Options

Give the glass assembly device more stability and better driving characteristics on soft, loose ground or off-road and reduce the contact pressure of the wheels on the ground as well.

Stable, compact, 2 practical handles, IP44, with lock

•  moulded high-strength plastic buffers placed on the steel pipe
• All glass transport wagons have horizontal support rods

• 1 pair of steel supports with anti-slip pads are pushed and fastened under the existing pedestal
• For transporting glass façade elements thicker than 250 mm

Telescopic load arm 420/620 mm, shackle, for all assembly lifts

This is an electric drive with 220V for the MRK 55.0. Cannot be ordered separately, only in combination with the the MRK 55.0.

This assembly crane tip for MRK 86 - 88 is extensible up to 2 meters with 1 or 2 falls. Cannot be ordered separately, only in combination with one of the compatible mini cranes.

This is an assembly tip that is extensible up to 4,5 meters with 1 or 2 falls. Cannot be ordered separately, only in combination with the MRK 168.0.

This is an assembly tip with load hook for the MRK 86.0, 126.0 and 168.0, 0.5m long and with a capacity of 300 kg. Cannot be ordered separately, only in combination with the compatible assembly crane.

This is an extensible heavy-load tip from Heavydrive inclduing load hook for MRK 55.0 - MRK 88.0, 0.8 m with a capacity of 500 kg. Cannot be ordered separately, only in combination with the compatible assembly crane.

Quick change battery

Shovel attachment with 2 steering castors

Shovel attachment with 4 double castors for TT 300, dimensions: 464 mm x 345 mm

Radio remote control for all VSG K systems.

 Vacuum suction systems for the hall asssembly of glass panes for window making, glass refining,,,,,

 Suctions plates for all VSG K-Anlagen

Drop drum pneumatic for VSGU 300 K - 450 K

• 300 kg of load capacity, up to 30 m
• hoist rope, 67 cm boom length

Mast lift with gear box for hand crank or cordless screwdriver

• Hand-radio control on / off
• with 2 speeds

The ideal solution loading and unloading vehicles when no crane or forklift is available. Turn your glass assembly device into a pallet truck for transporting pallets and other loads of up to 300 kg accessible from below.

For transporting suspended loads on glass assembly devices. The goods to be transported can easily be hooked in with a strap or chain.

These adapters make horizontal loading and unloading possible at machine or table heights of 1000 mm or 1250 mm, for placing panes on a table for example.

• screwed-on rod with handle for guiding and steering the glass transport wagon
• All glass transport wagons without support

• Replace tyres with140 mm diameter wheels to reduce the glass support height
• All glass transport wagons with support

Alternative for systems with normal arm, not in conjunction with a lowering cylinder

Glass panes can then be easily parked on level ground.

This special cleaning solution increases the grip and extends the service life of the cup!

All suction systems S1-5 / Q 1-5 / G 1-5

suitable for All suction systems S1-5 / Q 1-5 / G 1-5, other materials

All suction systems S1-5 / Q 1-5 / G 1-5, other materials

suitable for All suction systems S1-5 / Q 1-5 / G 1-5, other materials

- for better all-terrain mobility

- Extra-long extension

• with 500kg lifting capacity
• 29m cable with cable guide