Assembly cranes

Reach difficult to access locations with our assembly cranes, e.g. moving through 60 cm doorways and backyards. With the special Heavydrive assembly tips, you can even reach under eaves and behind scaffolding.

  • Our MRK mini cranes can be used on any surface, fit into any van when folded up and can be easily loaded and unloaded. Thanks to the crawler chassis, the assembly cranes can easily travel over uneven surfaces and even master extreme inclines. Thanks to the emission-free electric drive and the non-staining chains, they are also suitable for indoor use. They are operated directly or by radio remote control. Heavydrive offers a wide range of these flexible all-rounders up to a maximum load of 10,000 kg.

  • Can both lift and move loads Positioning accurate to the mm. Very easy to operate Ideal for indoor or outdoor use models with a capacity of up to 60 tonnes are available!

  • Assembly Tips an heavy-load tips can used for our assembly cranes.

  • Rental & Sales worldwide      /      Delivery-service 12h Germany-wide & 24h Europe-wide     /     Rental & Sales worldwide      /      Delivery-service 12h Germany-wide & 24h Europe-wide     /    Rental & Sales worldwide      /      Delivery-service 12h Germany-wide & 24h Europe-wide

    Device finder

    Load capacity:
    Maximum net weight:
    Lifting height:
    Device must be narrow, maximum:

    ÔÇ║ Further specifications
    Sort by:

    Very small mini caterpillar crane with a capacity of 0.995 tonnes and a hook height of 5.5 m. It can be powered electrically by high voltage or by petrol or gas. Especially suitable for assembly in narrow and crammed locations.


    Net Weight : 1050 kg
    Lift Height : 5.5 m
    • highly agile
    • its compact design allows you to work in tight spaces
    • suitable for in- and outdoor use

    Net Weight : 9070 kg
    Lift Height : 8 m

    An alternative to assembly crane MRK 195.0 but with a capacity of 7.5 tonnes and a heavy-load tip 5 m in length.


    Net Weight : 8100 kg
    Lift Height : 19.5 m
    • highly agile
    • its compact design allows you to work in tight spaces
    • suitable for in- and outdoor use

    Net Weight : 39000 kg
    Lift Height : 14 m

    This powerful assembly crane has a capacity of 6.0 tonnes, is suitable for off-road use and movable under a load of 2.0 tonnes without supports.


    Net Weight : 15640 kg
    Lift Height : 16.7 m

    This assembly crane has a capacity of 6.0 tonnes and can be equipped with a heavy-load tip which extends it to a length of 22.7 m.


    Net Weight : 8070 kg
    Lift Height : 19.5 m
    • operates like a fork lift
    • with a fully hydraulic telescopic extension boom
    • suitable for in- and outdoor use

    Net Weight : 5400 kg
    Lift Height : 7.2 m

    An alternative to assembly crane 158.0 but with a 2 tonnes higher capacity. Loads up to 800 kg can be positioned under eaves and even behind scaffolding with the heavy-load tips up to 4 m.


    Net Weight : 4835 kg
    Lift Height : 15.8 m

    This diesel-driven assembly crane has a capacity of 4.9 tonnes and is movable under a load of 2 tonnes.


    Net Weight : 9700 kg
    Lift Height : 16.35 m
    • its compact design allows you to work in tight spaces
    • suitable for in- and outdoor use

    Net Weight : 4800 kg
    Lift Height : 7 m

    This assembly crane has a capacity of 3.83 tonnes, is movable under a load of 500 kg and fits optimally into industrial lifts.


    Net Weight : 6500 kg
    Lift Height : 16.8 m
    • highly agile
    • its compact design allows you to work in tight spaces
    • suitable for in- and outdoor use

    Net Weight : 27150 kg
    Lift Height : 13 m

    This assembly crane has a capacity of 3 tonnes and is the best choice for heights up to 21 m and quick work at high capacity.


    Net Weight : 4835 kg
    Lift Height : 15.8 m

    This extremely versatile assembly crane with a capacity of 2.93 tonnes and a hook height of 12.66 m can be powered by electricity or diesel.


    Net Weight : 3900 kg
    Lift Height : 12.16 m

    This assembly crane has a capacity of 2.93 tonnes, is movable under a load of 1495 kg without further supports and is only 1.75 m wide.


    Net Weight : 4500 kg
    Lift Height : 9.3 m

    This assembly crane has a capacity of 2.9 tonnes and its 1.6 m heavy-load tip is extensible to a length of 3 m.


    Net Weight : 4000 kg
    Lift Height : 14.9 m

    The first mini caterpillar crane on the European market with a capacity of ~3 tonnes which is narrow enough to drive through a normal 600 mm doorway.


    Net Weight : 1850 kg
    Lift Height : 8.8 m

    This assembly crane has a capacity of 2.82 tonnes. With an extra long heavy-load tip, it can reach up to 2 m under eaves.


    Net Weight : 1900 kg
    Lift Height : 8.6 m
    • practical tiller control
    • suitable for in- and outdoor use

    Net Weight : 2000 kg
    Lift Height : 6 m

    This crane is a variation of the MRK 55.0. The main differences are that the V2 has a 0.7 tonnes higher capacity and sensor monitoring. It is petrol driven and especially suitable for assembling in narrow and crammed locations.


    Net Weight : 1290 kg
    Lift Height : 5.5 m

    This mini crane has a capacity of 1.7 tonnes. It is the smallest and lightest caterpillar crane in the world.


    Net Weight : 1290 kg
    Lift Height : 5.6 m
    • highly agile
    • its compact design allows you to work in tight spaces
    • suitable for in- and outdoor use

    Net Weight : 18600 kg
    Lift Height : 11 m
    • highly agile
    • its compact design allows you to work in tight spaces
    • suitable for in- and outdoor use

    Net Weight : 13450 kg
    Lift Height : 10.5 m

    As the largest assembly crane of the world with a lifting height of 22.9 meters and a 7.5 meter long, hydraulically movable assembly tip he mount panes with up to 10 tonnes capacity. 


    Net Weight : 14000 kg
    Lift Height : 22.9 m

    This is an electric drive with 220V for the MRK 55.0. Cannot be ordered separately, only in combination with the the MRK 55.0.


    Wireless remote control for MRK 55, 86, 126 and 168. Cannot be ordered separately, only in combination with one of the compatible mini cranes


    This assembly crane tip for MRK 86 - 88 is extensible up to 2 meters with 1 or 2 falls. Cannot be ordered separately, only in combination with one of the compatible mini cranes.


    This is an assembly crane tip that is extensible up to 4 meters with 1 or 2 falls. Cannot be ordered separately, only in combination with the MRK 126 - 158.


    This is an assembly tip that is extensible up to 4,5 meters with 1 or 2 falls. Cannot be ordered separately, only in combination with the MRK 168.0.


    This is an assembly tip that is extensible up to 4 meters with 1 or 2 falls. Cannot be ordered separately, only in combination with the MRK 168.0.


    This is an assembly tip with load hook for the MRK 86.0, 126.0 and 168.0, 0.5m long and with a capacity of 300 kg. Cannot be ordered separately, only in combination with the compatible assembly crane.


    This is an assembly tip that is extensible up to 2 meters with 1 or 2 falls. Cannot be ordered separately, only in combination with the MRK 167.0.


    This is an extensible heavy-load tip from Heavydrive inclduing load hook for MRK 55.0 - MRK 88.0, 0.8 m with a capacity of 500 kg. Cannot be ordered separately, only in combination with the compatible assembly crane.


    Using an assembly crane on easily-marked floors?
    Indoor assembly is a real challenge and high-quality flooring can be extremely easily marked. Marks left by traditional black tracks or damage caused trying to remove these marks can be very expensive!


    All categories and products

    Reach difficult to access locations with our assembly cranes, e.g. moving through 60 cm doorways and backyards. With the special Heavydrive assembly tips, you can even reach under eaves and behind scaffolding.