Data sheet

MRK 55.0 V2 assembly crane with a capacity of 1.7 tonnes and sensor monitoring



Services included

  • Advice on rental, purchase and project planning
  • Handling service
  • Payment and financing options
  • Fast and customised delivery options
  • Long-term rental models
  • Equipment replacement & spare parts service/li>
  • Digital services
  • Tested quality/li>
Optional additional services

  • Express delivery
  • Maintenance Plus
  • Instruction/training
  • Planning and advice service
  • Device operator
  • Handling Service
Brief description

This crane is a variation of the MRK 55.0. The main differences are that the V2 has a 0.7 tonnes higher capacity and sensor monitoring. It is petrol driven and especially suitable for assembling in narrow and crammed locations.

Long description

This crane is an alternative to the MRK 55.0. The main differences are that the V2 has a 0.7 tonnes higher capacity and sensor monitoring. This compact crane offers high performance with a capacity of 1.7 tonnes and a hook height of 5.50 m. It can either be electrically powered with 380 V / 400V or diesel powered and is therefore suitable for both indoor and outdoor use. With its caterpillar tracks, it can drive on any ground and thanks to its non-marking (non-colouring) tracks, steps in buildings are no problem either. Through various special HEAVYDRIVE assembly tips, you can even reach under eaves, behind scaffolding and many other places. In combination with our vacuum suction systems, you can bring almost every pane and panel, even with a porous surface, to its destination. Additionally, this crane can be manoeuvred by wireless remote control.







Data sheet (MRK 55.0 V2)

Features

Lift Height: 5.5 m
Load capacity (goods to be lifted): 2,72 t x 1 m
Net Weight: 1290 kg
Max. Hook Height Incl. tip S1 : 7,5 m with 2 m tip
Safety System : Load torque limiter Boom angle and load gauge Hydraulic pressure safety valve Hook securer Self-locking engine brake Winch cut
Max. Working Radius : 8,205 m
Cable : IWRC 6 mm

Telescopic System
Projection length : 2,85 m- 5,54 m
Telescoping Speed : 3,45 m/14 s
Boom Type : Fully automatic 4-section pentagonal telescopic boom
Turning Speed : 1,8 RPM
Cable Speed : 4,0 m/min
Supporting Feet : Hydraulic/manual

Carriage
Drive : Hydrostatic, continuously variable forward and reverse
Speed : 0- 3,3 km/ h
Gradability : 20°
Running Gear Length : 1044 mm
Ground Pressure : 0,20 kg/ cm²
Chain Width : 180 mm

Motor
Type : Mitsubishi GM401LE 1 cylinder, air-cooled petrol engine
Performance : 6,6 KW / 1800 RPM
Fuel : Petrol and electric 380 V
Tank Capacity : 12 l

Further product images

MRK 55.0 V2 assembly crane with a capacity of 1.7 tonnes and sensor monitoring | MRK 55.0 V2 assembly crane with a capacity of 1.7 tonnes and sensor monitoring
MRK 55.0 V2 assembly crane with a capacity of 1.7 tonnes and sensor monitoring | MRK 55.0 V2 assembly crane with a capacity of 1.7 tonnes and sensor monitoring
MRK 55.0 V2 assembly crane with a capacity of 1.7 tonnes and sensor monitoring | MRK 55.0 V2 assembly crane with a capacity of 1.7 tonnes and sensor monitoring
We are looking forward to hearing from you.

We handle all the necessary steps from the beginning to the end of the project.
+49 9070 96896900
sales@heavydrive.com
Products at work

Our products at work you'll find here:

references.heavydrive.com