Data sheet

MRK 55.0 assembly crane with a capacity of 1.0 tonnes

Services included

Advice on rental, purchase and project planning
Handling service
Payment and financing options
Fast and customised delivery options
Long-term rental models
Equipment replacement & spare parts service/li>
Digital services
Tested quality/li>

Optional additional services

Express delivery
Maintenance Plus
Instruction/training
Planning and advice service
Device operator
Handling Service

Brief description

Very small mini caterpillar crane with a capacity of 0.995 tonnes and a hook height of 5.5 m. It can be powered electrically by high voltage or by petrol or gas. Especially suitable for assembly in narrow and crammed locations.

Long description

This very small mini caterpillar crane with a maximum capacity of 0.995 tonnes and a hook height of 5.5 m is suitable for indoor and outdoor use. With its caterpillar tracks, it can drive on any ground and thanks to its non-marking (non-colouring) tracks, steps in buildings are no problem either. Through various special HEAVYDRIVE assembly tips, you can even reach under eaves, behind scaffolding and many other places. In combination with our vacuum suction systems, you can bring almost every pane and panel to its destination.

Data sheet (MRK 55.0)

Features

Lift Height:	5.5 m
Load capacity (goods to be lifted):	1,995 t x 1,1 m
Net Weight:	1050 kg

Max. Hook Height Incl. tip S1 :	6,8 m with 0,8 m tip
Boom Angle :	1°-75°
Safety System :	Load torque limiter Boom angle and load gauge Hydraulic pressure safety valve Hook securer Self-locking engine brake Winch cut
Max. Working Radius :	5,10 m
Cable :	IWCR 6 mm x 39 m

Telescopic System
Projection length :	2.85 - 5.30 m
Telescoping Speed :	3.45 m / 14 s
Boom Angle :	1°-75°
Boom Type :	Automatic, 1 cylinder + 2 ropes
Turning Angle :	360° continous
Turning Speed :	1,8 RPM
Cable Speed :	4,0 m/ min. (4- fall), 16,0 m/ min. (1- fall)
Supporting Feet :	Hydraulic/manual

Carriage
Drive :	Hydrostatic, continuously variable forward and reverse
Speed :	0- 2,3 km/ h
Gradability :	20°
Running Gear Length :	1044 mm
Ground Pressure :	0,20 kg/ cm²
Chain Width :	180 mm